smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD2500JB-00EVA0 Serial Number: WD-WMAEH1112064 Firmware Version: 15.05R15 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Dec 22 17:38:56 2004 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (7599) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 95) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 105 101 021 Pre-fail Always - 5283 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 62 5 Reallocated_Sector_Ct 0x0033 194 194 140 Pre-fail Always - 94 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 13209 10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 62 194 Temperature_Celsius 0x0022 110 253 000 Old_age Always - 40 196 Reallocated_Event_Count 0x0032 184 184 000 Old_age Always - 16 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 155 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 occurred at disk power-on lifetime: 852 hours (35 days + 12 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 38 b2 27 19 e0 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 29 00 00 38 00 00 21d+16:24:04.950 NOP [Abort queued commands] 00 00 25 00 00 40 00 00 21d+16:24:04.950 NOP [Abort queued commands] 0d 00 19 00 00 c8 26 00 21d+16:24:04.950 [RESERVED] 00 00 25 00 00 40 00 00 21d+16:24:04.950 NOP [Abort queued commands] 0d 00 19 00 00 08 26 00 21d+16:24:04.950 [RESERVED] Error 1 occurred at disk power-on lifetime: 852 hours (35 days + 12 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 40 b2 27 19 e0 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 25 00 00 40 00 00 21d+16:23:34.950 NOP [Abort queued commands] 00 00 25 00 00 40 00 00 21d+16:23:34.950 NOP [Abort queued commands] 0d 00 19 00 00 c8 26 00 21d+16:23:34.950 [RESERVED] 00 00 25 00 00 40 00 00 21d+16:23:34.950 NOP [Abort queued commands] 0d 00 19 00 00 08 26 00 21d+16:23:34.950 [RESERVED] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended captive Completed without error 00% 856 - # 2 Extended captive Completed without error 00% 843 - # 3 Conveyance offline Completed without error 00% 839 - # 4 Conveyance offline Interrupted (host reset) 00% 839 - # 5 Extended offline Completed: read failure 90% 805 219752370 # 6 Extended captive Completed: read failure 90% 805 219752370 # 7 Extended offline Completed: read failure 90% 805 219752370 # 8 Extended offline Completed: read failure 90% 805 219752370 # 9 Extended offline Completed: read failure 90% 803 219752370 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.